• Reset self-adaptive parameters and idle actuator:
  • Bosch Diesel Injection EDC16C39 CF4 EOBD (Eng. 1.9/2 4)
  • Injection Bosch Motronic ME7.3H4 EOBD
  • Injection Bosch Motronic ME7.3H4 Outside EEC
  • Injection Bosch Motronic ME7.3H4
  • Injection Bosch Motronic ME7.3.1 EOBD
  • Injection Bosch Motronic ME7.3.1 Outside EEC
  • Injection Bosch Motronic ME7.3.1 EOBD (2 lambda sensors)
  • Injection Bosch Motronic ME7.3.1 Outside EEC (2 lambdas)
  • Bosch Motronic ME7.3H4M EOBD Injection
  • Injection Magneti Marelli IAW 5NF
  • Injection - Magneti Marelli IAW 5NF EOBD
  • Magneti Marelli IAW 5NF Injection Outside EEC
  • Injection Magneti Marelli IAW 4EF/59F EOBD
  • Injection Magneti Marelli IAW 4EF/59F Outside EEC
  • Injection Magneti Marelli IAW 59F (eng. 1.2 8V)
  • Marelli Diesel Injection 6F3 EOBD (Eng. 1.3 JTD)
• Injection Bosch Diesel EDC15 CF3 (eng. 1.9/2.4):
  • Injector classification
  • Conditiner learn zeroing
  • Zeroing of self-adaption parameters
  • Zeroing fan mode learn
• Injection Bosch Diesel EDC15 CF3 (eng. 2.8):
  • Injector classification
  • Conditiner learn zeroing
  • Zeroing of self-adaption parameters
  • Zeroing fan mode learn
• Bosch Diesel Injection EDC16C39 CF4/EOBD (eng. 1.9/2.4)
  • Self-learnt functions reset
  • Conditioner control
  • Cooling fan 1
  • Fuel pump relay
  • Fan 2 (if present)
  • Preheating lamp control
  • Preheating relay
  • Water temperature w. lamp
  • Failure warning lamp control
  • Turbo regulator
  • EGR valve (if present)
  • Diesel pressure regulator
  • Cruise lamp
  • Oil pressure w. lamp (if present)
  • Diesel filter heating relay
  • Water in diesel lamp (if present)
  • Flow shutter valve
  • Fuel press. regulator (high press. pump input)
  • Particulate filter lamp
• Marelli Diesel Injection 6F3 EOBD (eng. 1.3 JTD)
  • Self-learnt functions reset
  • Conditioner control
  • Cooling fan 1
  • Cooling fan 2
  • Cruise lamp
  • Diesel pressure regulator
  • EGR valve (if present)
  • Failure warning lamp control
  • Fuel press. regulator (high press. pump input)
  • Fuel pump relay
  • Oil pressure w. lamp (if present)
  • Preheating lamp control
  • Preheating relay
  • Rev counter control
  • Turbo regulator
  • Water in diesel lamp (if present)
  • Water temperature w. lamp
• Bosch EDC16 CF3/EOBD Diesel Injection\n(1.9/2.4 eng.)
  • Self-learnt functions reset
  • Conditioner control
  • Cooling fan 1
  • Fuel pump relay
  • Fan 2 (if present)
  • Check engine light
  • Preheating lamp control
  • Preheating relay
  • Water temperature w. lamp
  • Turbo regulator
  • EGR valve (if present)
  • Diesel pressure regulator
  • Cruise lamp
  • Oil pressure w. lamp (if present)
  • Flow modif. throttle
  • Diesel filter heating relay
  • Water in diesel lamp (if present)

  Known Issues

  • CAN2 Functionality requires hanset firmware version 2.30, 2.32 or later and Application Selector version 1.39 or later.
  • Following its release it was discovered that this version causes communications issues with body controllers using the 'Fault tolerant CAN' protocol. Update to v3.74.

  Release History

  ---

  Version 3.72 - 8th February 2008

  Updates and Changes

  • Improved monitor list.

  Known Issues

  • CAN2 Functionality requires hanset firmware (Slave) version 2.30, 2.32 or later and Application Selector version 1.39 or later.

  Release History

  ---

  Version 3.71 - 30th November 2006

  Updates and Changes

  • New control unit activations (CAN2 cable NOT required):
    • Oil degradation indicator reset (only for version with DPF) :
      • Bosch Diesel Injection EDC16C39 CF4 EOBD (Eng. 1.9/2 4)
      • Marelli Diesel Injection 6F3 EOBD (Eng. 1.3 JTD)
  • Improved DTCs list(CAN2 cable NOT required):
    • Bosch 8 ABS
    • Bosch 8 VDC ABS
    • Bosch EDC16 CF3/EOBD Diesel Injection (1.9/2.4 eng.)
    • Bosch Motronic ME7.3H4M EOBD Injection
    • Injection - Magneti Marelli IAW 5NF EOBD
    • Magneti Marelli IAW 5NF Injection Outside EEC
    • Bosch EDC15 PSA diesel injection (engine 2.0 8v)
    • Bosch Motronic MeD7.11 EOBD injection
    • Bosch Motronic MeD7.11 Extra EEC Injection
    • Injection Bosch Diesel EDC15 PSA (engine 2.0 TD 16V)
    • Marelli 6JF CF3 Diesel injection (eng. 1.3 JTD)
  • New Translations added:
    • German
    • Dutch
    • Greek
    • Italian
    • Spanish
    • French
    • Portuguese
    • Turkish

Known Issues

• CAN2 Functionality requires hanset firmware (Slave) version 2.30, 2.32 or later and Application Selector version 1.39 or later.

Release History

Version 3.70 - 30th Ocober 2006

Updates and Changes

• New control unit activations (CAN2 cable NOT required):
  • Injector classification:
    • Bosch EDC16 CF3 EOBD Diesel Injection (Eng. 1.9/2.4)
    • Bosch Diesel Injection EDC16C39 CF4 EOBD (Eng. 1.9/2 4)
    • Marelli Diesel Injection 6F3 EOBD (Eng. 1.3 JTD)
    • Marelli 6JF CF3 Diesel Injection (Eng. 1.3 JTD)
  • ABS Bosch 5.7 (Front Left Load Valve, Front Right Load Valve, Rear Left Load Valve, Rear Right Load Valve, Front Left Drain Valve, Front Right Drain Valve, Rear Left Drain Valve, Rear Right Drain Valve, Pump Motor, ABS W. Lamp, EBD W. Lamp)
  • ABS Bosch 5 7 VDC (Front Left Load Valve, Front Right Load Valve, Rear Left Load Valve, Rear Right Load Valve, Front Left Drain Valve, Front Right Drain Valve, Rear Left Drain Valve, Rear Right Drain Valve, Pump Motor, ABS W. Lamp, EBD W.Lamp, VDC W. Lamp, ASR W. Lamp, Primary Valve 1, Primary Valve 2, Drive Valve 1, Drive Valve 2, Steering Angle Calibration)
  • ABS Bosch 5 7 ASR (Front Left Load Valve, Front Right Load Valve, Rear Left Load Valve, Rear Right Load Valve, Front Left Drain Valve, Front Right Drain Valve, Rear Left Drain Valve, Rear Right Drain Valve, Pump Motor, ABS W. Lamp, EBD W. Lamp, VDC W. Lamp, ASR W. Lamp, Primary Valve 1, Primary Valve 2, Drive Valve 1, Drive Valve 2)
  • ABS Bosch 8 (Front Left Load Valve, Front Right Load Valve, Rear Left Load Valve, Rear Right Load Valve, Front Left Drain Valve, Front Right Drain Valve, Rear Left Drain Valve, Rear Right Drain Valve, ABS W. Lamp, EBD W. Lamp, Recirculation Motor)
  • Bosch 8 VDC ABS (Front Left Load Valve, Front Right Load Valve, Rear Left Load Valve, Rear Right Load Valve, Front Left Drain Valve, Front Right Drain Valve, Rear Left Drain Valve, Rear Right Drain Valve, ABS W. Lamp, EBD W. Lamp, Recirculation Motor, Primary Valve 1, Primary Valve 2, Drive Valve 1, Drive Valve 2, VDC W. Lamp)
  • Bosch 8 ASR ABS (Front Left Load Valve, Front Right Load Valve, Rear Left Load Valve, Rear Right Load Valve, Front Left Drain Valve, Front Right Drain Valve, Rear Left Drain Valve, Rear Right Drain Valve, ABS W. Lamp, EBD W. Lamp, Recirculation Motor, Primary Valve 1, Primary Valve 2, Drive Valve 1, Drive Valve 2, VDC W. Lamp)
• Improved service light reset function (CAN2 cable required)

Known Issues

• CAN2 Functionality requires hanset firmware (Slave) version 2.30, 2.32 or later and Application Selector version 1.39 or later.

Release History

Version 3.65 - 09th September 2006

Updates and Changes

• New control unit tests (CAN2 cable required):
  • DTCs and Monitor List:
    • Marelli MF Body Computer
    • Siemens Tyre Pressure Control
    • Borg multi-function screen
    • InAlfa Romeo front sunroof (CAN)
    • PSA Marelli cluster (CAN)
    • Marelli odometer warning lamps (BTO CAN)
    • Texton sliding doors (CAN)
    • PSA Bosch ABS 8 ESP (CAN)
    • PSA DAV Connect Command (CAN)
    • PSA Valeo Parking Control Unit (CAN)
    • PSA Denso Climate Control (CAN)
    • Temic Airbag (CAN)
    • PSA Marelli Connect (CAN)
    • Marelli Diesel additive control (CAN)
    • Marelli 3 Connect (multi-model)
    • Marelli Body Computer 2
    • Marelli/Finmek Body Computer
    • Valeo Parking control unit
    • Marelli Full Body computer
    • Marelli Connect
  • Monitor List:
    • Body Computer Marelli 3
    • Climate control Delphi 2 (Single-zone)
    • Delphi Climate control (Dual zone)
    • Delphi Climate control (Single zone)
    • Delphi/Marelli Body Computer
    • Marelli Body Computer
    • Marelli Body Computer 1
    • Marelli Body Computer MY 03
    • Marelli Climate Control
    • Siemens Body Computer
    • TRW MY 03 Airbag (2F-2P-2T-I)
    • TRW MY 03 Airbag (2F-2P-I)
    • Air Bag TRW MY 03 (2F-2P-2L-2T-1G-I)
    • Air Bag TRW MY 03 (2F-2P-2L-2T-2G-I)
    • Air Bag TRW MY 03 (2F-4P-4L-2T-1G-I)

Known Issues

• CAN2 Functionality requires hanset firmware (Slave) version 2.30, 2.32 or later and Application Selector version 1.39 or later.

Release History

Version 3.64 - 13th July 2006

Updates and Changes

• New control unit tests (CAN2 cable required):
  • DTCs:
    • TRW MY 03 Airbag (2F-2P-2T-I)
    • TRW MY 03 Airbag (2F-2P-I)
    • Air Bag TRW MY 03 (2F-2P-2L-2T-1G-I)
    • Air Bag TRW MY 03 (2F-2P-2L-2T-2G-I)
    • Air Bag TRW MY 03 (2F-4P-4L-2T-1G-I)

Known Issues

• CAN2 Functionality requires hanset firmware (Slave) version 2.30, 2.32 or later and Application Selector version 1.39 or later.

Release History

Version 3.63 - 10th July 2006

Updates and Changes

• New service light reset function (CAN2 cable required):
  • Mannesman VDO instrument panel (Alfa 147 & GT)
  • Marelli instrument panel (Comfort) (Fiat Idea, Panda, Punto & Lancia Musa)
  • Marelli instrument panel (Palio RST2) (Fiat Palio RST 2)
  • Nippon Seiki instrument panel (Lancia Thesis)
  • Siemens instrument panel (Lancia Ypsilon)
• New oil service reset function (CAN2 cable required):
  • Marelli instrument panel (Palio RST2) (Fiat Palio RST 2)
• New control unit tests (CAN2 cable required):
  • DTCs and Monitor List:
    • Climate control Delphi (Two Three-zone)
    • Denso 2 Climate Control (Two-zone)
    • Denso Climate Control (Two-zone)
    • Denso Climate Control 1 (Single-zone)
    • Steering Lock TRW 2
    • TRW Steering Lock
    • Valeo Climate Control (Two-zone)
  • DTCs:
    • Body Computer Marelli 3
    • Climate control Delphi 2 (Single-zone)
    • Delphi Climate control (Dual zone)
    • Delphi Climate control (Single zone)
    • Delphi/Marelli Body Computer
    • Marelli Body Computer
    • Marelli Body Computer 1
    • Marelli Body Computer MY 03
    • Marelli Climate Control
    • Siemens Body Computer
• New Translations added:
  • German
  • Dutch
  • Greek
  • Italian
  • Spanish
  • French
  • Portuguese
  • Turkish

Known Issues

• CAN2 Functionality requires hanset firmware (Slave) version 2.30, 2.32 or later and Application Selector version 1.39 or later.

Version 3.60 - 16th June 2006

Updates and Changes

• New service light reset function (CAN2 cable required):
  • Instrument panel Marelli 2 (Fiat Croma 2005)
  • Instrument panel Siemens 2 (Alfa 159 & Brera)
  • Visteon instrument panel (Fiat Stilo)
• New control unit tests (CAN2 cable required):
  • Delphi electric steering 2
  • Instrument panel Marelli 2
  • Instrument panel Siemens 2
  • Mannesman VDO instrument panel
  • Marelli cluster
  • Marelli cluster (Palio RST)
  • Marelli instrument panel (Comfort)
  • Marelli instrument panel (Palio RST2)
  • Nippon Seiki instrument panel (Thesis)
  • Siemens instrument panel
  • TRW MY 03 airbag (2F-2P-2L-2T-I)
  • Visteon instrument panel
• New Control Unit Tests (CAN2 cable not required):
  • Aisin YLII 5 automatic gearbox
  • Magneti Marelli IAW 4SF injection
  • Magneti Marelli IAW 5SF CF4 EOBD Engine 1.4 16v injection
  • ESP TRW Lucas ABS
  • Marelli Selespeed CFC228F automatic gearbox
  • Bosch 8 ASR ABS
  • Temic airbag
  • Marelli PSA climate control
  • Delphi climate control
  • Delphi climate control MY03 single zone
  • Marelli automatic gearbox selespeed CFC218F(1)
  • Marelli automatic gearbox selespeed CFC208F(1)
  • Sagem multi-function screen
  • ZF 4HP20 PSA automatic gearbox
• Fixed read and erase DTCs on Injection Bosch Diesel EDC15 CF3 (eng. 2.8)

Known Issues

• After communication with a system that requires the CAN2 Cable you must disconnect the CAN2 cable from the vehicle before diagnosing a system that does not require the CAN2 cable.
• CAN2 Functionality requires hanset firmware version 2.30, 2.32 or later.

Version 3.53 - 11th April 2006

Updates and Changes

• New Control Unit Tests (Montitor List and DTCs):
  • TRW Tyre Pressure check
  • SCHRADER Tyre Pressure Check
  • Tyre Pressure Control TRW 2

Known Issues

Version 3.52 - 27th March 2006

Updates and Changes

• Marelli diesel additive check:
  • FAP Replacement

Known Issues

Version 3.51 - 20th March 2006

Updates and Changes

• New Control Unit Tests (Montitor List):
  • Automatic Gearbox ZF 4HP20 (KW2)
  • Bosch 5.7 ESP PSA ABS
  • Bosch Diesel Injection EDC16C39 CF4/EOBD (eng. 1.9/2.4)
  • Bosch discharge headlamp (left)
  • Bosch discharge headlamp (right)
  • Bosch EDC15 PSA diesel injection (eng. 16v)
  • Bosch Motronic Me7.4.6 PSA Injection
  • DELPHI Electric Steering
  • Delphi MT25E injection (eng. 1.8)
  • Diesel Bosch EDC15 CF3 injection (eng. 2.0/2.3/2.8)
  • Gas injection Metatron 5D0 EOBD
  • Gas injection Metatron 6D0 EOBD
  • Hella discharge headlamps
  • Lucas DCN2 Diesel Injection
  • Magneti Marelli IAW 4EF/4AF Gas Injection
  • Magneti Marelli IAW 5AF Gas Injection
  • Magneti Marelli Injection IAW 5SF CF4/EOBD (eng. 1.4 8v)
  • Magneti Marelli MM4.8P Injection (El. Key)
  • Marelli Diesel Injection 6F3 EOBD (eng. 1.3 JTD)
  • Marelli diesel additive check
  • Metatron 6A0 Gas Injection
  • SAGEM SpeedPro power steering
  • TRW 1 Power Steering
  • Valeo discharge headlamp (left)
  • Valeo discharge headlamp (right)
  • See coverage list for details.
• New Translations added:
  • German
  • Dutch
  • Greek
  • Italian
  • Spanish
  • French
  • Portuguese
  • Turkish

Known Issues

Version 3.41 - 05th Dec 2005

Updates and Changes

• New Models:
  • Alfa Romeo 159
  • Alfa Romeo Brera
  • Alfa Romeo GT
  • Fiat Croma '05
  • Fiat Idea
  • Fiat Stilo 1.8 8V
  • Lancia Musa
• New Control Unit Tests (DTCs):
  • AISIN YLII 5 Automatic Gearbox
  • Automatic Gearbox ZF 4HP20 (KW2)
  • Bosch 5.7 ESP PSA ABS
  • Bosch Diesel Injection EDC16C39 CF4/EOBD (eng. 1.9/2.4)
  • Bosch discharge headlamp (left)
  • Bosch discharge headlamp (right)
  • Bosch EDC15 PSA diesel injection (eng. 16v)
  • Bosch Motronic Me7.4.6 PSA Injection
  • DELPHI Electric Steering
  • Delphi MT25E injection (eng. 1.8)
  • Diesel Bosch EDC15 CF3 injection (eng. 2.0/2.3/2.8)
  • Gas injection Metatron 5D0 EOBD
  • Gas injection Metatron 6D0 EOBD
  • Hella discharge headlamps
  • Litronic discharge headlamp (left)
  • Litronic discharge headlamp (right)
  • Lucas DCN2 Diesel Injection
  • Magneti Marelli IAW 4EF/4AF Gas Injection
  • Magneti Marelli IAW 5AF Gas Injection
  • Magneti Marelli injection IAW 4SF
  • Magneti Marelli Injection IAW 5SF CF4/EOBD (eng. 1.4 8v)
  • Magneti Marelli MM4.8P Injection (El. Key)
  • Magneti Marelli MM4MP2 PSA Injection
  • Magneti Marelli MM6LP PSA Injection
  • Marelli Diesel Injection 6F3 EOBD (eng. 1.3 JTD)
  • Metatron 6A0 Gas Injection
  • Poor Steering TRW 2
  • SAGEM SpeedPro power steering
  • TRW 1 Power Steering
  • Valeo discharge headlamp (left)
  • Valeo discharge headlamp (right)
  • See coverage list for details.

Known Issues

Version 3.30 - 05th Sep 2005

Updates and Changes

• New Systems Added:
  • Bosch 8 ABS
  • Bosch 8 VDC ABS
  • Bosch EDC16 CF3/EOBD Diesel Injection (1.9/2.4 eng.)
  • Bosch Motronic ME7.3H4M EOBD Injection
  • Injection - Magneti Marelli IAW 5NF EOBD
  • Magneti Marelli IAW 5NF Injection Outside EEC
  • Bosch EDC15 PSA diesel injection (engine 2.0 8v)
  • Bosch Motronic MeD7.11 EOBD injection
  • Bosch Motronic MeD7.11 Extra EEC Injection
  • Injection Bosch Diesel EDC15 PSA (engine 2.0 TD 16V)
  • Marelli 6JF CF3 Diesel injection (eng. 1.3 JTD)
  • See coverage list for details.

Known Issues

Version 3.21 - 22th July 2005

Updates and Changes

• SIEMENS MY 99 Airbag (12 Systems), Air Bag TRW MY 99 (10 Systems), Autoliv Airbag MY 99 (4 Systems). See coverage list for details.
• Changed to new snapshot format.

Known Issues

Version 3.20 - 28th March 2005

Updates and Changes

• Model Year Update to include hundreds of new vehicle systems and ISO codes. See coverage list for details.

Known Issues

Version 3.12 - 18th November 2004

Updates and Changes

• Fix to Greek font which was not available on the last release.
• Live data requests now working on all injection systems.
• Fix to intake pressure on Injection Bosch Motronic M1.5.4

Known Issues

Version 3.11 - 28th October 2004

Updates and Changes

• Automatically connects via 16-pin cable with or without 3-pin adapter.
• Graphic facility is now fully functional.

Known Issues

Version 3.10 - 30th September 2004

Updates and Changes

• Multicable compatible.

Known Issues

• Graphic facility not working.

Version 3.09 - 23rd September 2004

Updates and Changes

• Added missing engine system for Bravo/Brava.

Known Issues

• Graphic facility not working.

Version 3.08 - 6th August 2004

Updates and Changes

• Dutch language only.
• Identical to previous version. Re-labelled to force a download from CD3.

Known Issues

Version 3.07 - 6th August 2004

Updates and Changes

• Dutch language only.
• Identical to previous version. Re-labelled to force a download from CD2 archive on CD3.

Known Issues

Version 3.06 - 1st July 2004

Updates and Changes

• Added Dutch translations.
• Fixed IAW 5NF Engine load scaling.

Known Issues

Version 3.05 - 26th March 2004

Updates and Changes

• Fix for Alfa Romeo Spider/GTV read DTCs.
• Correction to request for DTCs on Motronic ME3.1 EOBD.

Known Issues

Version 3.04 - 30th January 2004

Updates and Changes

• Graphic facility added to all monitor lists.
• Added Greek translations.
• Added Swedish translations.
• Improvements to ISO comms driver.

Known Issues

Version 3.03 - 10th December 2003

Updates and Changes

• Fix to stop forcing Proline version from menu.
• Snaphot memory area size changed.
• Beep fix.

Known Issues

Version 3.02 - 26th November 2003

Updates and Changes

• New DTC display.

Known Issues

• Proline version being forced from menu.

Version 3.01 - 5th November 2003

Updates and Changes

• Corrected text for DTC display.

Known Issues

Version 3.00 - 4th November 2003

Updates and Changes

• Multicartridge release.

Known Issues

Previous History

Version 2.02 - 16th July 2003

• Greek language added.
• Bug fixes.

Version 2.01 - 31st December 2002

• Plusline/Proline release in English, French, German, Dutch and Swedish.

Version 1.00 - 2nd November 2001

• Initial Plusline release in English, German, Dutch and Swedish.