Land Rover
Version 3.28
14th July 2008
(Filename: seldrexm.328)
Contents
Updates and Changes
- Added Spanish and Portuguese translations
Known Issues
Updates and Changes
- Modified EMS2000 ignition angle (common and individual cylinders) scalings to match Siemens ECU specification.
Known Issues
Updates and Changes
- Corrected EDS fault code reading to read all codes, not just the first two.
- Fix to hardware settings for P38 air suspension monitor list.
-
- Added a TD5 engine tune setting results check (although, tune setting appears to only work on a new module.)
- Cable setup routine modified to fix problem of not connecting in monitor list but connecting OK in DTC display.
Known Issues
Updates and Changes
- Defender Td5 throttle pot 2/3 track setting corrected.
- Updated warning that air suspension DTCs and activations aren't supported for use with the multi-cable to only display for Range Rover Classic (P38 is OK)
Known Issues
Updates and Changes
- Added warning that some air suspension activations only work when the doors, bonnet and tailgate are closed and with the engine running.
- Added warning that some climate control activations only work with the system set to "Auto - ON".
- Message displayed at comms connection for Range Rover P38 body controller changed to say ignition ON.
- Freelander with Siemens SRS now clears DTCs without displaying an error popup.
- Range Rover Classic ABS and Discovery I 4-pin ABS systems now connect and establish communications.
- Added warning that air suspension DTCs and activations aren't supported for use with the multi-cable.
- Added Siemens MS43 for Freelander NAS KV6 - DTCs, Monitor List and Actuations.
Known Issues
Updates and Changes
- Fix to 'Read DTCs' for Range Rover P38 air suspension.
Known Issues
Updates and Changes
- New SRS : Siemens 2002 SRS added to freelander
Known Issues
Updates and Changes
- New Vehicle : Range Rover Bosch ME7.2 engine system added
- Freelander menu items changed to reflect year more accurately
- Engine menu type descriptions improved
Known Issues
Updates and Changes
- Freelander 2002 - ABS system added
- Fix to pressure readings on EDC monitor list
Known Issues
Updates and Changes
- Portuguese language build
- Fix to air suspension displaying all DTC's (untested)
Known Issues
Updates and Changes
- Snapshot download fixed
- Unknown fault codes are now displayed in the correct format for all systems
- Missing fault codes added for the EWS3 system
- DDE4 DTC display problem fixed
- 'Dead Time' removed from MEMS 1.6/1.9 to prevent the monitor list locking up
- Coil Charge Time units changed from micro to milli seconds
- Poor connection with 1.9 MEMS ECU fixed
Known Issues
Updates and Changes
- Air Suspension communications are now reliable with the multi-cable
- ABS Wabco D now also checks for intermittent DTC's as well as present DTC's
Known Issues
Updates and Changes
- The DTS are now formatted in the new style i.e. 32,7 characters are used like other apps for the DTC descriptions
Known Issues
Updates and Changes
- Gears EAT GS8 87 transmission, now corectly shows low ratio when in low ratio and high ratio when in high ratio.
Known Issues
Updates and Changes
Known Issues
- Gears EAT GS8 87 transmission, incorrectly shows lo ratio when in hi ratio and hi ratio when in lo ratio.
Updates and Changes
- changed to new snapshot format
- Increased monitor lists buffer so long lists displayed corectly
Known Issues
allways in debuging mode
Updates and Changes
- Air suspension now fully working with the multi cable
Known Issues
- Some monitor lists not displaying correctly
Updates and Changes
- Resolved problems with the original cable support for CUX 14 now.
Known Issues
- Air suspension not communicating when using multi cable
Updates and Changes
- Resolved problems with the original cable support.
Known Issues
- Air suspension not communicating when using multi cable
Updates and Changes
- Multicable compatible.
- Added Spanish translations.
Known Issues
Updates and Changes
- Identical to previous version.
Re-labelled to force a download from CD3.
Known Issues
Updates and Changes
Known Issues
Updates and Changes
- Includes some ECU programming.
- Added Greek translations.
Known Issues
Updates and Changes
- Language translation updates.
Known Issues
Updates and Changes
- Fix to Proline monitor list error.
- Menu corrections.
Known Issues
Updates and Changes
- Fix to 5 Baud wake-up routine.
Known Issues
Updates and Changes
- Fixes for snapshot facility and beep.
Known Issues
Updates and Changes
- Corrected text for new DTC display.
Known Issues
Updates and Changes
Known Issues
Version 1.02 - 27th August 2003
- Beta release from SourceSafe.
|