Land Rover 2
Version 1.20
17th March 2010
(Filename: selr2exm.120)
Contents
Version 1.20 - 17th March 2010
Updates and Changes
- New model added - Defender (L316) 2007-
- New Engine Management System added - 2.4 TDCi
- Read and Erase DTC's
- Monitor List
- Discovery 3 / LR3 (L319)
- New system added - Parking distance controller
- Read and Erase DTC's
- Monitor List
- Service functions added to the following existing systems:
- 2.7 TDV6 engine management
- Reset Diesel Particulate Filter Oil service counters
- Diesel Particulate Filter exchange
- Fuel Lift Pump Reset
- Vehicle Dynamics Module
- Brake Bleed
- Calibrate Steering angle sensor
- Electronic Parking Brake
- Un-Jam Park Brake
- Service mode - 'Latching' position
- Service mode - 'Mounting' position
- Ride Level Monitor (Air Suspension)
- Set operation mode
- Set tolerance mode
- Service mode - Deflate air springs
- Service mode - Deflate resevoir
- Service mode - Deflate all (springs/resevoir)
- Service mode - Re-enable normal operation
- Steering Angle Sensor Module
- Steering Angle Calibration
- Range Rover Sport (L320)
- New system added - Parking distance controller
- Read Erase DTC's
- Monitor List
- Service functions added to the following existing systems:
- 2.7 TDV6 engine management
- Reset Diesel Particulate Filter Oil service counters
- Diesel Particulate Filter exchange
- Fuel Lift Pump Reset
- Vehicle Dynamics Module
- Brake Bleed
- Calibrate Steering angle sensor
- Electronic Parking Brake
- Un-Jam Park Brake
- Service mode - 'Latching' position
- Service mode - 'Mounting' position
- Ride Level Monitor (Air Suspension)
- Set operation mode
- Set tolerance mode
- Service mode - Deflate air springs
- Service mode - Deflate resevoir
- Service mode - Deflate all (springs/resevoir)
- Service mode - Re-enable normal operation
- Steering Angle Sensor Module
- Steering Angle Calibration added
- Range Rover (L322) ISO - 2003 to 2005
- 3.0 TD6 Diesel Engine
- Actuators added
- Service Functions added
- Cylinder Balance
- Idle speed adjust
- Vehicle Dynamics Module
- Actuators added
- Steering angle calibration added
- Range Rover (L322) CAN - 2005 on
- TDV8 engine
- Service Functions added
- Reset Diesel Particulate Filter oil counters
- Diesel Particulate Filter exchange
- Freelander 2 (L359)
- 2.2 tdci TD4 Diesel Engine management
- Actuators added
- Service functions added:
- Injector configuration
- Oil Change Reset
- Diesel Particulate filter exchange
- Diesel Particulate pressure sensor exchange
- Lambda sensor replacement
- EGR replacement
- Throttle valve replacement
- Boost pressure sensor replacement
- Diesel particulate air temp sensor replacement
- Fuelling adaption reset
- Vehicle Dynamics Module
- Service functions added:
- Calibrate Steering angle sensor
- Calibrate lateral acceleration sensor
- Calibrate longditudal acceleration sensor
- Calibrate brake pressure sensor
- Calibrate yaw sensor
- Calibrate roll rate sensor
- 271 new body fault codes added.
Known Issues
- Application selector version 1.60 or greater required for support of the CAN Mux device on low speed CAN systems
Version 1.13 - 17th July 2009
Updates and Changes
- Added disable service interval reset functionality for all CAN variants
Known Issues
- Application selector version 1.60 required for support of the CAN Mux device on low speed CAN systems
Version 1.12 - 01th May 2009
Updates and Changes
- Range Rover (L322) 2002-2005 improved monitor list functionality / stability on:
- Steering Angle Sensor Module
- Transmission Control Module
- Vehicle Dynamics Control Module
- Restraints Control Module
- Air Suspension Control Module
- Immobiliser EWS3 Control Module
- Air Conditioning L30 Control Module
- Instrument VDO Control Module
- Tyre Pressure Monitoring System
- Fuel Burning Heater Control Module
- Seat Memory Control Module
- Steering Lock Control Module
- Rain Sensor Control Module
- Parking Aid Control Module
- Head Lamp Levelling Control Module
- LH Xenon Control Module
- RH Xenon Control Module
- Lighting Control Module
- GM3 Body Control Module
Known Issues
- Application selector version 1.60 required for support of the CAN Mux device on low speed CAN systems
Version 1.11 - 01th April 2009
Updates and Changes
- New coverage menu changes to include the following:
- Range Rover L322 (MY03 - MY08)
- Range Rover Sport L320 (MY05 - MY08)
- Discovery 3 L319 (MY05 - MY08)
- Land Rover Freelander 2 L359 (MY07 - MY09)
Service Interval Reset functionality model year changes:
- Range Rover L322 (MY07 - MY08)
Known Issues
- Application selector version 1.60 required for support of the CAN Mux device on low speed CAN systems
- Some L322 IPC modules may only support a manual reset procedure for model years MY06 - MY07
Version 1.10 - 20th March 2009
Updates and Changes
- New coverage for Land Rover Freelander 2 L359 (MY07 - MY08)
- Petrol L6 (DTC read and clear, monitor list)
- Diesel L4 (DTC read and clear, monitor list)
- Transmission control module (DTC read and clear, monitor list)
- All terrain control module (DTC read and clear, monitor list)
- Rear differntial control module (DTC read and clear, monitor list)
- Auxiliary heat control module (DTC read and clear, monitor list)
- Anti-Lock braking system (DTC read and clear, monitor list)
- Steering angle sensor module (DTC read and clear, monitor list)
- Body control module (DTC read and clear, monitor list)
- Headlamp control module (DTC read and clear, monitor list)
- Occupant classification system (DTC read and clear support)
- Restraints control module (DTC read and clear, monitor list)
- Heating ventilation and air conditioning (DTC read and clear support)
- Instrument panel cluster (DTC read and clear support, Service Interval reset)
- Infotainment control module (DTC read and clear support)
- Parking aid control module (DTC read and clear support)
- Driver door module (DTC read and clear support)
- Passenger door module (DTC read and clear support)
- Service Interval Reset functionality on the following vehicles:
- Range Rover L322 (MY06 - MY07)
- Range Rover Sport L320 (MY05 - MY07)
- Discovery 3 L319 (MY05 - MY07)
- Land Rover Freelander 2 L359 (MY07 - MY08)
Known Issues
- Application selector version 1.60 required for support of the CAN Mux device on low speed CAN systems
Updates and Changes
- Range Rover L322 (MY06 - MY07) - Added monitor list support for the following systems:
- Powertrain control module - Petrol 4.2L V8 Supercharged
- Powertrain control module - Petrol 4.4L V8
- Powertrain control module - Diesel 3.6L TdV8
- Transmission control module(CAN)
- Vehicle Dynamics Control Module(CAN)
- Restraints Control Module(CAN)
- Range Rover Sport L320 (MY05 - MY07) - Added monitor list support for the following systems:
- Powertrain control module - Petrol 4.2L V8 Supercharged
- Powertrain control module - Petrol 4.4L V8
- Powertrain control module - Diesel 2.7L TdV6
- Powertrain control module - Diesel 3.6L TdV8
- Transmission control module(CAN)
- Vehicle Dynamics Control Module(CAN)
- Restraints Control Module(CAN)
- Discovery 3 L319 (MY05 - MY07) - Added monitor list support for the following systems:
- Powertrain control module - Petrol 4.0L V6
- Powertrain control module - Petrol 4.4L V8
- Powertrain control module - Diesel 2.7L TdV6
- Transmission control module(CAN)
- Vehicle Dynamics Control Module(CAN)
- Restraints Control Module(CAN)
Known Issues
Updates and Changes
- Range Rover L322 (MY03 - MY05) - Added monitor list support for the following systems:
- Powertrain control module (PCM) - 3.0 Td6 Diesel Engine
- Powertrain control module (ME 7.2) - Petrol Engine
- Transmission control module (TCM) - Petrol Engine
- Transmission control module (TCM) - Diesel Engine
- Transfer case control module (TCCM)
- Airbag control module - (RCM)
- Air Conditioning
- Instruments (VDO)
- Immobiliser
- Parking aid control module
- Tyre pressure monitoring (TPMS)
- Steering angle sensor module (SASM)
- Vehicle dynamics module (VDM)
- Air Suspension
- Also added monitor list support to systems carried over onto 06my diesel vehicles.
- Powertrain control module (ME 7.2) - Fixed Petrol Engine read DTCs.
Known Issues
Updates and Changes
-
Range Rover L322 (MY03 - MY05) - Added DTC read and clear support for the following systems
- Transmission control module (TCM) - Petrol Engine
- Tyre pressure monitoring (TPMS)
- Instruments (VDO)
- Fuel burning heater control module
- Seat memory control module
- Steering lock control module
- Parking aid control module
- Rain sensor control module
- Head lamp levelling control module
- LH and RH xenon control modules
- Lighting control module
- Body control module (GM3)
Known Issues
- Powertrain control module (ME 7.2) - Petrol Engine does not read DTCs yet.
Updates and Changes
-
Range Rover L322 (MY03 - MY05) - Added DTC read and clear support for the following systems
- Powertrain control module (PCM) - 3.0 Td6 engine
- Steering angle sensor module (SASM)
- Transfer case control module (TCCM)
- Transmission control module (TCM)
- Vehicle dynamics module (VDM)
- Air Conditioning
- Air Suspension
- Immobiliser
- Application now correctly indicates when no connection has been established on CAN systems.
- The multi-switch is now reset after connection on any system has failed to make reconnection more reliable.
- DTCs with status "Test not completed since ..." masked out from display.
- MY06 Range Rover DTC list now generated from BMW MRS4 system for more accurate descriptions.
- Updated German translations.
Updates and Changes
-
Discovery 3 (MY05 - MY07) - Added DTC read and clear support for the following systems
- Ride level monitoring (RLM)
- Steering angle sensor module (SASM)
- Transfer case control module (TCCM)
- Transmission control module (TCM)
- Vehicle dynamics module (VDM)
- Rear differential control module (RDCM)
-
Range Rover L322 (MY06 [1] - MY07) - Added DTC read and clear support for the following systems
- Ride level monitoring (RLM)
- Steering angle sensor module (SASM) [1]
- Transfer case control module (TCCM) [1]
- Transmission control module (TCM) [1]
- Vehicle dynamics module (VDM) [1]
- Restraints control module (RCM) MY06 only
- Rear differential control module (RDCM) MY07 only
[1] Note : These systems on MY06 vehicles are for petrol-engined variants only.
-
Range Rover L322 (MY06 - BMW Td6 engine only) - Added DTC read and clear support for the following systems
- Powertrain control module (PCM)
- Steering angle sensor module (SASM)
- Transfer case control module (TCCM)
- Transmission control module (TCM)
- Vehicle dynamics module (VDM)
-
Range Rover Sport (MY05 - MY07) - Added DTC read and clear support for the following systems
- Ride level monitoring (RLM)
- Steering angle sensor module (SASM)
- Transfer case control module (TCCM)
- Transmission control module (TCM)
- Vehicle dynamics module (VDM)
- Rear differential control module (RDCM)
- Added DTC status text display function for CAN systems.
- Added translated text (DEU, NLD, FRA, PTG, ITA, ESP) for J14229 DTC descriptions.
Updates and Changes
- Changed to VIN screen to substitute '*' for unprintable characters to prevent display problems.
- Changed menus to remove monitor list options until implemented.
- Added implementation for
-
Range Rover (MY07)
- OCS - DTC Read and DTC Clear
- RCM - DTC Read and DTC Clear
Known Issues
Updates and Changes
-
First release for initial testing with implementations for
-
Range Rover (MY06 - MY07)
- PCM - DTC Read and DTC Clear
-
Range Rover Sport (MY05 / MY06 US - MY07)
- PCM - DTC Read and DTC Clear
- RCM - DTC Read and DTC Clear
-
Discovery 3 (MY05 - MY07)
- PCM - DTC Read and DTC Clear
- RCM - DTC Read and DTC Clear
Known Issues
|